How to Install a Vinyl Fence

by sachinlathiya

You and your family will feel secure and private. Fences are also strong design elements that can define a home’s exterior appearance. Fences can be complicated to construct and maintain. Wooden fences can look beautiful but require a lot of maintenance. Some untreated wood like cedar can be left on its own to turn silver-gray and streaky–a look that some homeowners do not like. PVC Fencing Jeffrey’s bay Painted fences give your home a neat, trim look yet become difficult to paint as they age out.

Vinyl fences make this possible. Vinyl fences offer a high level of durability, low maintenance, and are very attractive. Vinyl fences do not need to be painted or treated as the color is already infused into the vinyl. They keep their colors consistent from year to year, regardless of the season.

The basics of building a vinyl fence

Vinyl fences are made up of interlocking components. You must ensure that all components are included in the purchase to make a complete kit. Vinyl fences don’t allow for any improvisation so make sure you have everything needed to complete the project.

Vinyl Picket Fences

PVC Fencing Port Elizabeth Vinyl picket fences begin with anchor pipes driven into the ground by a sledgehammer. Hollow posts slide over the anchor pipes like sleeves. A section can be made from two anchor pipes: one rail at its bottom and one at its top. Multiple pickets run through each rail.

Vinyl Privacy Fences

Vinyl privacy fence posts that are six feet tall must be concrete-anchored to the ground, just like traditional four-by-four posts. These posts cannot slide over an anchor tube; they are directly sunk into the concrete. A fence panel can be pre-built, which means it is one piece and not multiple pieces that need to be put together.

Codes and Regulations

Before building your fence, you may need to apply for a permit . An inspector must inspect the site after the work is completed and close the permit. All work must follow local building codes. Take a look at legal issues like easements, zoning. You can get advice from your local permitting department about local zoning regulations and setback regulations that may affect fence construction.

When is Vinyl Fence Best Built?

It is difficult to drill the holes or drive the anchor pipe for a picket fence. You should wait for the ground to thaw before you begin construction.

Fence-Building Safety

You should always call your local utility locator before digging on your property. They will be able to identify any underground utilities, such as water, gas, and electric lines, whenever you do so. PVC Fencing East London These services will be marked with color-coded spray paint that eventually wears off on its own.

What you’ll need

Equipment / Tools

  • Shovel or post-hole digger
  • Wood stakes and twine
  • Bubble level
  • Tape measure
  • Sledgehammer
  • Cordless drill
  • Circular saw

Materials

  • Vinyl picket and privacy fence set
  • Quick-set concrete
  • Filler gravel

Related Posts

Leave a Comment