Is your internet connection not working? Well, that is frustrating. No matter how great a WiFi setup you have, without an internet connection, it is not worth a penny. Well, in most cases, people claim that their Netgear router is not connecting to the modem. Hence, there is no internet connection in the WiFi signals.
So, if that is what you have been experiencing, you can’t access routerlogin.net. Thus, you cannot enjoy your favorite shows, movies, or games. What to do then? Well, there are a few troubleshooting tips that you can follow. This article is all about ensuring a strong connection between the Netgear router and modem. Keep reading.
Causes of Netgear Router Not Connected to Modem
Have you measured the distance between the Netgear router and modem? If not, you should consider it. Placing the router far away from the modem is not the right thing to do. This could be one of the reasons why the router is connecting to the modem.
Moreover, the placement of the router in a corner, under the take, on a fish tank, near an electronic gadget, a thick wall, and other objects poses difficulties. In short, not choosing the ideal location for the router placement is a major reason behind the issue.
Power Supply Faulty
The Netgear router needs a constant power supply to work consistently. However, in case the power supplied is not constant, that could be a major issue. Hence, using a faulty power supply cable is one of the reasons why the Netgear router is not connecting to the modem.
Moreover, the cable used might have cuts. Furthermore, the power supply could be damaged. In short, the power reaching is either not enough or not consistent enough. Hence, there might be fluctuations in the power supply.
Damaged Ethernet Cable
Have you checked the Ethernet cable connected to the Netgear router? If not, you should check it thoroughly. If there are any cuts or damaged parts, the internet connection won’t be strong. Moreover, it might even keep fluctuating.
Hence, that is another reason why the Netgear router is not connected to the modem. In other cases, the Ethernet wire could be damaged from the connecting point. This point keeps on getting plugged in and removed. Hence, it might have damaged and resulted in the issue.
One of the major reasons why the Netgear router can’t connect to the modem is the outdated router firmware. Firmware consists of written rules and instructions for the router to work seamlessly. However, these need updates from time to time.
In case you have been avoiding the updates for many days or weeks, it could become an issue. Hence, the router might not connect to the modem. Even if it does, the internet might not work on the router. Thus, it is a major issue that is responsible for a number of other issues on the router’s end.
Problems with Power Source
Many devices do not work properly because of a faulty switchboard. That means the Netgear router is not receiving the required current voltage. Hence, due to working in lower or higher voltage, there might have been a short circuit on the motherboard. Without the router’s proper functioning, you can’t access the internet and can’t perform the Nighthawk router login to access further settings.
Moreover, the plugin outlet could be faulty, loose, or damaged. When the router does not get proper supply from the power outlet, the connection between the router and modem won’t get stable.
As you can see, numerous reasons are there behind the router not connecting to the modem issue. You need to remove these issues to connect the two devices. After you get the internet connection, you can access the default login page via the 192.168.1.1 IP address. So, remove all these obstacles as early as possible to have a strong internet connection.
Read Also about chetak result